Category: Reliable Penguin

Nagios Install

July 31, 2004



Webmin
------
www.webmin.com

wget http://unc.dl.sourceforge.net/sourceforge/webadmin/webmin-1.110-1.noarch.rpm
rpm -i webmin-1.110-1.noarch.rpm

Nmap
----
http://www.nmap.org

cd /root/archive
wget http://download.insecure.org/nmap/dist/nmap-3.48.tar.bz2
bunzip2 nmap-3.48.tar.bz2
tar -xvf nmap-3.48.tar
./configure
make
make install

Net SNMP
--------
http://net-snmp.sourceforge.net/

cd /root/archive
wget http://unc.dl.sourceforge.net/sourceforge/net-snmp/net-snmp-5.0.9.tar.gz
tar -xvzf net-snmp-5.0.9.tar.gz
cd net-snmp-5.0.9
./configure
make
umask 022
make install

ZLib
----

http://www.gzip.org/zlib/

cd /root/archive
wget http://www.libpng.org/pub/png/src/zlib-1.1.4.tar.gz
tar -xvzf zlib-1.1.4.tar.gz
cd zlib-1.1.4
./configure
make
make test
make install
cd ..
mv zlib-1.1.4 zlib

LibPNG
------

http://www.libpng.org/pub/png/

cd /root/archive
wget http://unc.dl.sourceforge.net/sourceforge/png-mng/libpng-1.2.5.tar.gz
tar -xvzf libpng-1.2.5.tar.gz
mv libpng-1.2.5 libpng
cd libpng
cp scripts/makefile.gcmmx ./Makefile
make test
make install
make test-installed

FreeType
--------

http://www.freetype.org/

cd /root/archive
wget http://unc.dl.sourceforge.net/sourceforge/freetype/freetype-2.1.5.tar.gz
tar -xvzf freetype-2.1.5.tar.gz
cd freetype-2.1.5
./configure
make
make install

JPeg
----
http://www.ijg.org/

cd /root/archive
wget http://www.ijg.org/files/jpegsrc.v6b.tar.gz
tar -xvzf jpegsrc.v6b.tar.gz
cd jpeg-6b
./configure
make
make test
make install
make install-lib

GD Graphics Library
-------------------

http://www.boutell.com/gd/

cd /root/archive
wget http://www.boutell.com/gd/http/gd-2.0.15.tar.gz
tar -xvzf gd-2.0.15.tar.gz
cd gd-2.0.15

./configure
make install

Edit /etc/ld.so.conf and add a line:
  /usr/local/lib
Save and then run:

ldconfig

FPing
-----
http://www.fping.com/

cd /root/archive
wget http://www.fping.com/download/fping-2.4b2_to-ipv6.tar.gz
tar -xvzf fping-2.4b2_to-ipv6.tar.gz
cd fping-2.4b2_to-ipv6
./configure
make
make install

Net::SMTP
---------

http://theoryx5.uwinnipeg.ca/CPAN/data/Net-SNMP/README.html

cd /root/archive
perl -MCPAN -e "install Net::SNMP"

answer yes when prompted to install prerequistes

Nagios
------

http://www.nagios.org

cd /root/archive
wget http://unc.dl.sourceforge.net/sourceforge/nagios/nagios-1.1.tar.gz
wget http://unc.dl.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.3.1.tar.gz
tar -xvzf nagios-1.1.tar.gz
cd nagios-1.1
./configure --prefix=/usr/local/nagios \
	--with-cgiurl=/nms/cgi-bin \
	--with-htmurl=/nms \
	--with-nagios-user=nagios \
	--with-nagios-grp=nagios \
        --with-mysql-comments \
        --with-mysql-downtime \
        --with-mysql-retention \
        --with-mysql-status \
        --with-mysql-inc=/usr/include/mysql \
        --with-mysql-lib=/usr/lib/mysql

Now edit base/Makefile and add "-lmysqlclient -lz" in front of the "-o" option
on the compile line for nagios.c.

Edit cgi/Makefile and add "-lmysqlclient -lz" in front of the "-o" option on the
compile line for *.c

make all

useradd nagios
make install
make install-init
make install-commandmode
make install-config

cd /root/archive
tar -xvzf nagios-plugins-1.3.1.tar.gz
cd nagios-plugins-1.3.1
./configure --prefix=/usr/local/nagios \
	--with-nagios-user=nagios \
	--with-nagios-group=nagios \
	--with-cgiurl=/nms/cgi-bin

make all
make install

edit /etc/httpd/conf/httpd.conf and add the following lines
to the bottom of the file:

ScriptAlias /nms/cgi-bin/ /usr/local/nagios/sbin/
<Directory "/usr/local/nagios/sbin/">
    AllowOverride AuthConfig
    Options ExecCGI
    Order allow,deny
    Allow from all
</Directory>

Alias /nms/ /usr/local/nagios/share/
<Directory "/usr/local/nagios/share">
    Options None
    AllowOverride AuthConfig
    Order allow,deny
    Allow from all
</Directory>

service httpd restart

create a .htaccess file in /usr/local/nagios/sbin
with the following:

AuthName "NMS Access"
AuthType Basic
AuthUserFile /usr/local/nagios/etc/htpasswd.users
require valid-user

create a similar file in /usr/local/nagios/share

htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin

Setup the config file....

service nagios start



Nagios-statd
------------
http://www.twoevils.org/html/files.php

cd /root/archive
wget http://www.twoevils.org/files/netsaint_statd/nagios-statd-3.08.tar.gz
tar -xvzf nagios-statd-3.08.tar.gz
cd nagios-statd-3.08


RRDTool
-------

http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/


cd /root/archive
wget http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/pub/rrdtool-1.0.45.tar.gz
tar -xvzf rrdtool-1.0.45.tar.gz
cd rrdtool-1.0.45
sh configure
make
make install
cd /usr/local
ln -s rrdtool-1.0.45/ rrdtool

APAN
----

http://apan.sourceforge.net/

cd /root/archive
wget http://unc.dl.sourceforge.net/sourceforge/apan/apan-0.2.1.tar.gz
cp apan-0.2.1.tar.gz /usr/local/nagios/
cd /usr/local/nagios
tar -xvzf apan-0.2.1.tar.gz
rm apan-0.2.1.tar.gz
cd apan
chmod og+x plugs/*.sh
cp *.cgi ../sbin/
chmod go+x ../sbin/*.cgi
cp graph.png ../share/images/logos/
cp libexec/* ../libexec/

edit /usr/local/nagios/etc/checkcommands.cfg and add:

# apan
define command {
   command_name apan
   command_line /usr/local/nagios/apan/apan.sh $ARG1$ $HOSTNAME$ "$SERVICEDESC$" $TIMET$ $ARG2$ $ARG3$
}

edit /usr/local/nagios/etc/services.cfg and add:

define service {
        host_name                      nms.jaguartech.com
        service_description            Disk-usage
        check_command                  apan!disk!150!100
        use                            generic-service
        normal_check_interval          5
}

edit apan.cfg and add:

nms.jaguartech.com;Disk-usage;/usr/local/nagios/rrd/nms.jaguartech.com_Disk-usage.rrd;c|d;c-used:AREA c-free:STACK 
d-used:AREA d-free:STACK;Disk usage;Bytes;-1 1 -b 1024

mkdir ../rrd
/usr/local/rrdtool/bin/rrdtool create \
	/usr/local/nagios/rrd/nms.jaguartech.com_Disk-usage.rrd \
	-s 60 \
	DS:c-used:GAUGE:900:0:U \
	DS:c-free:GAUGE:900:0:U \
	DS:d-used:GAUGE:900:0:U \
	DS:d-free:GAUGE:900:0:U \
	RRA:AVERAGE:0.5:1:50400 \
	RRA:AVERAGE:0.5:60:43800
chown nagios.nagios ../rrd/nms.jaguartech.com_Disk-usage.rr

edit /usr/local/nagios/etc/cgi.cfg and add:

xedtemplate_config_file=/usr/local/nagios/etc/hostextinfo.cfg

to the bottom of the file.

create a new file hostextinfo.cfg and add:

define serviceextinfo{
        host_name               nms.jaguartech.com
        service_description     Disk-usage
        notes_url               /nms/cgi-bin/apan.cgi?host=nms.jaguartech.com&service=Disk-usage
        icon_image              graph.png
        icon_image_alt          View graphs
}








/usr/local/rrdtool/bin/rrdtool create \
	/usr/local/nagios/rrd/www.jaguartech.com_Ping.rrd \
	-s 60 \
	DS:ping:GAUGE:300:0:U \
	RRA:AVERAGE:0.5:1:50400 \
	RRA:AVERAGE:0.5:60:43800 \


/usr/local/rrdtool/bin/rrdtool create \
        /usr/local/nagios/rrd/router1.barrie.org_Ping.rrd \
        -s 60 \
        DS:ping:GAUGE:300:0:U \
        RRA:AVERAGE:0.5:1:50400 \
        RRA:AVERAGE:0.5:60:43800 \

/usr/local/rrdtool/bin/rrdtool create \
	/usr/local/nagios/rrd/router1.barrie.org_Net-usage.rrd \
	-s 60 \
	DS:IN:COUNTER:300:0:U \
	DS:OUT:COUNTER:300:0:U \
	RRA:AVERAGE:0.5:1:50400 \
	RRA:AVERAGE:0.5:60:43800

Nagmin
------
http://nagmin.sourceforge.net

cd /root/archive
wget http://unc.dl.sourceforge.net/sourceforge/nagmin/nagmin-2.0.3.tar.gz

cp nagmin-2.0.3.tar.gz /usr/local
cd /usr/local
tar -xvzf nagmin-2.0.3.tar.gz
ln -s /usr/local/nagmin-2.0.3 nagmin
cd nagmin

login to webmin
goto Servers -> MySQL -> User Permissions -> Create new user
create a the user "nagmin" with all permissions 

run /usr/local/nagmin/setup and answer the prompts

login to webmin
goto Webmin -> Webmin Configuration -> Webmin Modules
install webmin modules from local file at:
	/usr/local/nagmin/nagmin-2.0.3.wbm




NRPE Install
------------
cd /root
wget http://unc.dl.sourceforge.net/sourceforge/nagios/nrpe-1.9.tar.gz
tar -xvzf nrpe-1.9.tar.gz
cd nrpe-1.9
./configure
make all
cp src/nrpe /usr/local/sbin/
cp nrpe.cfg /etc

edit /etc/services and add:
	nrpe            5666/tcp        # NRPE

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

280

281

282

283

284

285

286

287

288

289

290

291

292

293

294

295

296

297

298

299

300

301

302

303

304

305

306

307

308

309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325

326

327

328

329

330

331

332

333

334

335

336

337

338

339

340

341

342

343

344

345

346

347

348

349

350

351

352

353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

368

369

370

371

372

373

374

375

376

377

378

379

380

381

382

383

384

385

386

387

Webmin

------

www.webmin.com

wget http://unc.dl.sourceforge.net/sourceforge/webadmin/webmin-1.110-1.noarch.rpm

rpm -i webmin-1.110-1.noarch.rpm

Nmap

----

http://www.nmap.org

cd /root/archive

wget http://download.insecure.org/nmap/dist/nmap-3.48.tar.bz2

bunzip2 nmap-3.48.tar.bz2

tar -xvf nmap-3.48.tar

./configure

make

make install

Net SNMP

--------

http://net-snmp.sourceforge.net/

cd /root/archive

wget http://unc.dl.sourceforge.net/sourceforge/net-snmp/net-snmp-5.0.9.tar.gz

tar -xvzf net-snmp-5.0.9.tar.gz

cd net-snmp-5.0.9

./configure

make

umask 022

make install

ZLib

----

http://www.gzip.org/zlib/

cd /root/archive

wget http://www.libpng.org/pub/png/src/zlib-1.1.4.tar.gz

tar -xvzf zlib-1.1.4.tar.gz

cd zlib-1.1.4

./configure

make

make test

make install

cd ..

mv zlib-1.1.4 zlib

LibPNG

------

http://www.libpng.org/pub/png/

cd /root/archive

wget http://unc.dl.sourceforge.net/sourceforge/png-mng/libpng-1.2.5.tar.gz

tar -xvzf libpng-1.2.5.tar.gz

mv libpng-1.2.5 libpng

cd libpng

cp scripts/makefile.gcmmx ./Makefile

make test

make install

make test-installed

FreeType

--------

http://www.freetype.org/

cd /root/archive

wget http://unc.dl.sourceforge.net/sourceforge/freetype/freetype-2.1.5.tar.gz

tar -xvzf freetype-2.1.5.tar.gz

cd freetype-2.1.5

./configure

make

make install

JPeg

----

http://www.ijg.org/

cd /root/archive

wget http://www.ijg.org/files/jpegsrc.v6b.tar.gz

tar -xvzf jpegsrc.v6b.tar.gz

cd jpeg-6b

./configure

make

make test

make install

make install-lib

GD Graphics Library

-------------------

http://www.boutell.com/gd/

cd /root/archive

wget http://www.boutell.com/gd/http/gd-2.0.15.tar.gz

tar -xvzf gd-2.0.15.tar.gz

cd gd-2.0.15

./configure

make install

Edit /etc/ld.so.conf and add a line:

/usr/local/lib

Save and then run:

ldconfig

FPing

-----

http://www.fping.com/

cd /root/archive

wget http://www.fping.com/download/fping-2.4b2_to-ipv6.tar.gz

tar -xvzf fping-2.4b2_to-ipv6.tar.gz

cd fping-2.4b2_to-ipv6

./configure

make

make install

Net::SMTP

---------

http://theoryx5.uwinnipeg.ca/CPAN/data/Net-SNMP/README.html

cd /root/archive

perl -MCPAN -e "install Net::SNMP"

answer yes when prompted to install prerequistes

Nagios

------

http://www.nagios.org

cd /root/archive

wget http://unc.dl.sourceforge.net/sourceforge/nagios/nagios-1.1.tar.gz

wget http://unc.dl.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.3.1.tar.gz

tar -xvzf nagios-1.1.tar.gz

cd nagios-1.1

./configure --prefix=/usr/local/nagios \

--with-cgiurl=/nms/cgi-bin \

--with-htmurl=/nms \

--with-nagios-user=nagios \

--with-nagios-grp=nagios \

--with-mysql-comments \

--with-mysql-downtime \

--with-mysql-retention \

--with-mysql-status \

--with-mysql-inc=/usr/include/mysql \

--with-mysql-lib=/usr/lib/mysql

Now edit base/Makefile and add "-lmysqlclient -lz" in front of the "-o" option

on the compile line for nagios.c.

Edit cgi/Makefile and add "-lmysqlclient -lz" in front of the "-o" option on the

compile line for *.c

make all

useradd nagios

make install

make install-init

make install-commandmode

make install-config

cd /root/archive

tar -xvzf nagios-plugins-1.3.1.tar.gz

cd nagios-plugins-1.3.1

./configure --prefix=/usr/local/nagios \

--with-nagios-user=nagios \

--with-nagios-group=nagios \

--with-cgiurl=/nms/cgi-bin

make all

make install

edit /etc/httpd/conf/httpd.conf and add the following lines

to the bottom of the file:

ScriptAlias /nms/cgi-bin/ /usr/local/nagios/sbin/

AllowOverride AuthConfig

Options ExecCGI

Order allow,deny

Allow from all

</Directory>

Alias /nms/ /usr/local/nagios/share/

Options None

AllowOverride AuthConfig

Order allow,deny

Allow from all

</Directory>

service httpd restart

create a .htaccess file in /usr/local/nagios/sbin

with the following:

AuthName "NMS Access"

AuthType Basic

AuthUserFile /usr/local/nagios/etc/htpasswd.users

require valid-user

create a similar file in /usr/local/nagios/share

htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin

Setup the config file....

service nagios start

Nagios-statd

------------

http://www.twoevils.org/html/files.php

cd /root/archive

wget http://www.twoevils.org/files/netsaint_statd/nagios-statd-3.08.tar.gz

tar -xvzf nagios-statd-3.08.tar.gz

cd nagios-statd-3.08

RRDTool

-------

http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/

cd /root/archive

wget http://people.ee.ethz.ch/~oetiker/webtools/rrdtool/pub/rrdtool-1.0.45.tar.gz

tar -xvzf rrdtool-1.0.45.tar.gz

cd rrdtool-1.0.45

sh configure

make

make install

cd /usr/local

ln -s rrdtool-1.0.45/ rrdtool

APAN

----

http://apan.sourceforge.net/

cd /root/archive

wget http://unc.dl.sourceforge.net/sourceforge/apan/apan-0.2.1.tar.gz

cp apan-0.2.1.tar.gz /usr/local/nagios/

cd /usr/local/nagios

tar -xvzf apan-0.2.1.tar.gz

rm apan-0.2.1.tar.gz

cd apan

chmod og+x plugs/*.sh

cp *.cgi ../sbin/

chmod go+x ../sbin/*.cgi

cp graph.png ../share/images/logos/

cp libexec/* ../libexec/

edit /usr/local/nagios/etc/checkcommands.cfg and add:

# apan

define command {

command_name apan

command_line /usr/local/nagios/apan/apan.sh $ARG1$ $HOSTNAME$ "$SERVICEDESC$" $TIMET$ $ARG2$ $ARG3$

}

edit /usr/local/nagios/etc/services.cfg and add:

define service {

host_name nms.jaguartech.com

service_description Disk-usage

check_command apan!disk!150!100

use generic-service

normal_check_interval 5

}

edit apan.cfg and add:

nms.jaguartech.com;Disk-usage;/usr/local/nagios/rrd/nms.jaguartech.com_Disk-usage.rrd;c|d;c-used:AREA c-free:STACK

d-used:AREA d-free:STACK;Disk usage;Bytes;-1 1 -b 1024

mkdir ../rrd

/usr/local/rrdtool/bin/rrdtool create \

/usr/local/nagios/rrd/nms.jaguartech.com_Disk-usage.rrd \

-s 60 \

DS:c-used:GAUGE:900:0:U \

DS:c-free:GAUGE:900:0:U \

DS:d-used:GAUGE:900:0:U \

DS:d-free:GAUGE:900:0:U \

RRA:AVERAGE:0.5:1:50400 \

RRA:AVERAGE:0.5:60:43800

chown nagios.nagios ../rrd/nms.jaguartech.com_Disk-usage.rr

edit /usr/local/nagios/etc/cgi.cfg and add:

xedtemplate_config_file=/usr/local/nagios/etc/hostextinfo.cfg

to the bottom of the file.

create a new file hostextinfo.cfg and add:

define serviceextinfo{

host_name nms.jaguartech.com

service_description Disk-usage

notes_url /nms/cgi-bin/apan.cgi?host=nms.jaguartech.com&service=Disk-usage

icon_image graph.png

icon_image_alt View graphs

}

/usr/local/rrdtool/bin/rrdtool create \

/usr/local/nagios/rrd/www.jaguartech.com_Ping.rrd \

-s 60 \

DS:ping:GAUGE:300:0:U \

RRA:AVERAGE:0.5:1:50400 \

RRA:AVERAGE:0.5:60:43800 \

/usr/local/rrdtool/bin/rrdtool create \

/usr/local/nagios/rrd/router1.barrie.org_Ping.rrd \

-s 60 \

DS:ping:GAUGE:300:0:U \

RRA:AVERAGE:0.5:1:50400 \

RRA:AVERAGE:0.5:60:43800 \

/usr/local/rrdtool/bin/rrdtool create \

/usr/local/nagios/rrd/router1.barrie.org_Net-usage.rrd \

-s 60 \

DS:IN:COUNTER:300:0:U \

DS:OUT:COUNTER:300:0:U \

RRA:AVERAGE:0.5:1:50400 \

RRA:AVERAGE:0.5:60:43800

Nagmin

------

http://nagmin.sourceforge.net

cd /root/archive

wget http://unc.dl.sourceforge.net/sourceforge/nagmin/nagmin-2.0.3.tar.gz

cp nagmin-2.0.3.tar.gz /usr/local

cd /usr/local

tar -xvzf nagmin-2.0.3.tar.gz

ln -s /usr/local/nagmin-2.0.3 nagmin

cd nagmin

goto Servers -> MySQL -> User Permissions -> Create new user

create a the user "nagmin" with all permissions

run /usr/local/nagmin/setup and answer the prompts

goto Webmin -> Webmin Configuration -> Webmin Modules

install webmin modules from local file at:

/usr/local/nagmin/nagmin-2.0.3.wbm

NRPE Install

------------

cd /root

wget http://unc.dl.sourceforge.net/sourceforge/nagios/nrpe-1.9.tar.gz

tar -xvzf nrpe-1.9.tar.gz

cd nrpe-1.9

./configure

make all

cp src/nrpe /usr/local/sbin/

cp nrpe.cfg /etc

edit /etc/services and add:

nrpe 5666/tcp # NRPE

NCFTP Client

July 31, 2004

http://www.ncftpd.com/


cd /root/archive
wget ftp://ftp.ncftp.com/ncftp/ncftp-3.1.6-src.tar.gz

tar -xvzf ncftp-3.1.6-src.tar.gz
cd ncftp-3.1.6
./configure
make
make install

cd /root/archive

wget ftp://ftp.ncftp.com/ncftp/ncftp-3.1.6-src.tar.gz

tar -xvzf ncftp-3.1.6-src.tar.gz

cd ncftp-3.1.6

./configure

make

make install

OpenLDAP as Global Addres Book

July 31, 2004



GOAL: Setup OpenLDAP for use as a Global Address Book by Microsoft
Outlook and SquirrelMail webmail clients.

ENVIRONMENT:
	Red Hat Linux Advanced Server release 2.1AS (Pensacola)

INSTRUCTIONS:

1. Install Berkeley DB software.

> cd /usr/local/archive
> wget http://www.sleepycat.com/update/snapshot/db-4.2.52.tar.gz
> tar -xvzf db-4.2.52.tar.gz
> cd db-4.2.52
> cd build_unix/
> ../dist/configure
> make
> make install

2. Install OpenLDAP software.

> cd /usr/local/archive
> wget ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/openldap-2.2.4.tgz
> tar -xvzf openldap-2.2.4.tgz

Next create a build.sh script with the following:

  #!/bin/bash
  env CPPFLAGS="-I/usr/local/BerkeleyDB.4.2/include" \
        LDFLAGS="-L/usr/local/BerkeleyDB.4.2/lib" ./configure \
        --prefix /usr/local/openldap-2.2.4


Make the script executable and run it:

> chmod 755 build.sh
> ./build.sh

Now finish the build:

> make depend
> make
> make install

3. Install Webmin.

See webmin.txt

4. Install perl modules.

> wget http://theoryx5.uwinnipeg.ca/cpan/authors/id/P/PE/PETDANCE/Test-Harness-2.40.tar.gz
> tar -xvzf Test-Harness-2.40.tar.gz
> cd Test-Harness-2.40
> perl Makefile.PL
> make
> make test
> make install

> wget http://theoryx5.uwinnipeg.ca/cpan/authors/id/M/MS/MSCHWERN/Test-Simple-0.47.tar.gz
> tar -xvzf Test-Simple-0.47.tar.gz
> cd Test-Simple-0.47
> perl Makefile.PL
> make
> make test
> make install

> wget http://theoryx5.uwinnipeg.ca/cpan/authors/id/G/GB/GBARR/Convert-ASN1-0.18.tar.gz
> tar -xvzf Convert-ASN1-0.18.tar.gz
> cd Convert-ASN1-0.18
> perl Makefile.PL
> make
> make test
> make install

5. Install OpenLdap2 module for Webmin:

a. Download the module:
  
> cd /usr/local/archive
> wget http://gaia.anet.fr/webmin/openldap/releases/openldap2-0_1.wbm

b. Login to Webmin.
c. Select Webmin icon from top menu bar.
d. Select Webmin Configuration icon.
e. Select Webin Modules icon.
f. In the Install Module form select "From local file" and enter the path:

  /usr/local/archive/openldap2-0_1.wbm

g. Press the Install Module From File button to install the module.

6. Configure OpenLDAP Webmin module.

a. Login to Webmin.
b. Select the Servers icon from the top menu bar.
c. Select the "OpenLDAP Server 2" icon. The following error message will be
displayed:

  "It was not possible to read your configuration file for slapd.
  Please check int the module configuration that the path for this file is correct."

d. Select the Module Config tab.
e. Enter the following config options into the form:

Path to slapd.conf file: /usr/local/openldap-2.2.4/etc/openldap/slapd.conf
Command to apply changes: service slapd restart
Command to start slapd: service slapd start
Command to stop slapd: service slapd stop
Port number daemon slapd is listening to: 389
Path to slapd daemon: /usr/local/openldap-2.2.4/libexec/slapd
LDAP Properties for all new users:
   objectClass: inetorgperson
   objectClass: top
Email domain for mail attribute: acme.com

f. Press the Save button. You will be returned to the main OpenLDAP config screen.

7. Apply BDB support patch to OpenLdap2 Webmin module.

> cd /usr/local/archive
> wget http://www.reliablepenguin.com/projects/ldap/openldap2_webmin_bdb.patch
> cd /usr/libexec/webmin/openldap2
> patch -Np5 < /usr/local/archive/openldap2_webmin_bdb.patch

8. Setup slapd service:

> cd /usr/local/archive
> wget http://www.reliablepenguin.com/clients/misc/slapd.service
> cp slapd.service /etc/init.d/slapd
> chkconfig --add slapd
> chkconfig --level 35 slapd on

9. Generate directory administrator's password:

> /usr/local/openldap-2.2.4/sbin/slappasswd -h {MD5}

You will be prompted to enter a password and then the crypted version
of the password will be displayed:

  New password:
  Re-enter new password:
  {MD5}risfylFZSeXVT7IrjtlVdQ==

The crypted password is "{MD5}risfylFZSeXVT7IrjtlVdQ==". Save this string
for use in the next step.

10. Configure OpenLDAP via Webmin.

a. Login to Webmin.
b. Select the Servers icon from top menu bar.
c. Select the "OpenLdap Server 2" icon.
d. Delete the default backend definition by selecting the 
predefined backend named "dc=my-domain,dc=com".  Press the delete
button at the bottom of the screen and when prompted confirm the deletion.

e. Define a new backend by selecting the "Add backend" link. The "Add Backend"
form will be displayed. Enter the suffix:

	c=US

Set the backend type to "bdb".
Press the "Create backend" button at the bottom of the form.

Next a form for setting backend options will be displayed. Set the following
fields under "General Backend Options" :

  Directory : /usr/local/openldap-2.2.4/var/openldap-us-data

Press the "Save" button at the bottom of the form to save changes and return
to the "Global Options" screen.

f. Define a new backend by selecting the "Add backend" link. The "Add Backend"
form will be displayed. Enter a suffix like:

	dc=my-domain,dc=com 

Each component of your domain should be repesented by a domain component (dc)
element. For example if your domain is "acme.com" then use:

	dc=acme,dc=com

Or if your domain is "accounting.acme.com" then use:

	dc=accounting,dc=acme,dc=com

Set the backend type to "bdb".
Press the "Create backend" button at the bottom of the form.

Next a form for setting backend options will be displayed. Set the following
fields under "General Backend Options" :

  Administrator DN : cn=Administrator,dc=acme,dc=com
  Administrator Password : {paste in crypted password from previous step}
  Read Only : No
  Schema Check : Yes
  Default Access : None
  Last Modifiers : Yes
  Size Limit : 500
  Time Limit : 120

Set the following fields under "BDB backend specific options" :

  Directory : /usr/local/openldap-2.2.4/var/openldap-data
  Cache Size : 1000
  Max Search Stack Depth : 16
  Files Protection Mode : 0600
  Checkpoint Every : 100 10
  DB No Sync : No
  Allow Dirty Reads : No
  IDL Cache Size : 0
  SHM Key : leave blank
  Session Log Store : leave blank
  Deadlock Handling : Default

Press the "Save" button at the bottom of the form to save changes and return
to the "Global Options" screen.

g. Select the "Include Files" icon at the bottom of the screen.

Enter:

  /usr/local/openldap-2.2.4/etc/openldap/schema/cosine.schema

into the "Create a new include file" field and press the "Create" button.

Repeat this process to create include files for:

  /usr/local/openldap-2.2.4/etc/openldap/schema/nis.schema
  /usr/local/openldap-2.2.4/etc/openldap/schema/inetorgperson.schema

h. Now start the slapd server:

> service slapd start

and run the following test query:

> ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts

You should get results similar to:

  version: 2

  #
  # filter: (objectclass=*)
  # requesting: namingContexts
  #

  #
  dn:
  namingContexts: dc=acme,dc=com

  # search result
  search: 2
  result: 0 Success

  # numResponses: 2
  # numEntries: 1

Now test the c=US referral is working:

>  ldapsearch -x -b "c=US"

You should see results similar to:

  version: 2

  #
  # filter: (objectclass=*)
  # requesting: ALL
  #

  # search result
  search: 2
  result: 10 Referral
  matchedDN: c=US
  ref: ldap://mail.acme.com/dc=acme,dc=com??sub

  # numResponses: 1

11. Initialize the LDAP database.

a. Create a file in /usr/local/openldap-2.2.4/etc/openldap named top.ldif with
the following contents:

  dn: dc=acme,dc=com
  objectClass: top
  objectClass: dcObject
  objectClass: organization
  dc: acme
  o: Acme, Inc.
  description: Acme, Inc.

  dn: cn=Administrator,dc=acme,dc=com
  objectClass: organizationalRole
  cn: Administrator
  description: Directory Manager

  dn: ou=People,dc=acme,dc=com
  objectClass: top
  objectClass: organizationalUnit
  ou: People
  description: Container for people objects.

  dn: ou=Groups,dc=acme,dc=com
  objectClass: top
  objectClass: organizationalUnit
  ou: Groups
  description: Container for group objects.

b. Import top.ldif into OpenLDAP using the slapadd command:

> /usr/local/openldap-2.2.4/sbin/slapadd -v \
   -f /usr/local/openldap-2.2.4/etc/openldap/slapd.conf \
   -l /usr/local/openldap-2.2.4/etc/openldap/top.ldif

c. Create directory for c=US database:

> mkdir /usr/local/openldap-2.2.4/var/openldap-us-data

c. Create a file in /usr/local/openldap-2.2.4/etc/openldap named top2.ldif with
the following contents:

  dn: c=US
  objectClass: top
  objectClass: referral
  objectClass: extensibleObject
  c: US
  description: placeholder
  ref: ldap://mail.acme.com/dc=acme,dc=com

b. Import top2.ldif into OpenLDAP using the slapadd command:

> /usr/local/openldap-2.2.4/sbin/slapadd -v \
   -f /usr/local/openldap-2.2.4/etc/openldap/slapd.conf \
   -l /usr/local/openldap-2.2.4/etc/openldap/top2.ldif

12. Verify that required rpm packages are installed:

> rpm -q openldap
openldap-2.0.21-1

> rpm -q openldap-clients
openldap-clients-2.0.21-1

> rpm -q auth_ldap
auth_ldap-1.4.8-3

> rpm -q nss_ldap.
nss_ldap-172-3

13. Configure nss_ldap and pam_ldap module.

Edit /etc/ldap.conf

a. Set host to the local machine.

  host 127.0.0.1

b. Set base to the same as used in the openldap config.

  base dc=acme,dc=com

c. Set port to 389.

  port 389

d. Set the bind DN for root:
 
  rootbinddn cn=Administrator,dc=acme,dc=com

e. Set scope to one level:

  scope one

f. Set pam_filter:

  pam_filter objectclass=posixaccount

g. Set pam_login_attribute:

  pam_login_attribute uid

h. Set pam_member_attribute:

  pam_member_attribute uid

i. Set pam_password:

  pam_password md5

j. Set object bases:

  nss_base_passwd ou=People,dc=acme,dc=com?one
  nss_base_shadow ou=People,dc=acme,dc=com?one
  nss_base_group  ou=Groups,dc=acme,dc=com?one

14. Create a file at /etc named ldap.secret.

Place in this file on a single line the password for the Administrator.

Set the permissions on this file:

> chmod 600 /etc/ldap.secret

15. Modify NSS config file.

Change the passwd, shadow and group lines to read as follows:

  passwd:     files ldap
  shadow:     files ldap
  group:      files ldap


16. Setup access controls.

a. Login to Webmin.
b. Select the Servers icon from the top menu bar.
c. Select the "OpenLDAP 2 Server" icon.
d.


defaultaccess none

access to dn.subtree="dc=acme,dc=com" attr=userPassword
        by dn="cn=root,dc=acme,dc=com" write
        by self write
        by * auth

access to dn.subtree="ou=People,dc=acme,dc=com"
        by * read

access to dn.subtree="dc=acme,dc=com"
        by * read

access to dn.subtree="c=US"
        by * read




16. Login to webmin. Select System icon. Select LDAP Users and Groups.

A message saying that Perl-LDAP is not installed will be displayed. Select
the link to install this module.


Import Users
============


cat import.ldif | ldapadd -h localhost \
	-w adminpass -D "cn=Administrator,dc=acme,dc=net" -x




CLIENT CONFIGURATION
====================

Outlook Express 6

1. Start Microsoft Outlook.

2. From the menu bar select Tools and then select Address Book. The Address
Book window will be displayed.

3. Select Tools from the menu bar and then select Accounts. The Internet
Accounts dialog will be displayed.

4. Press the Add button to create a new directory service definition. The
"Internet Connection Wizard" will be displayed. The first screen of the 
wizard is titled "Internet Directory Serer Name". 

5. In the "Internet directory (LDAP) server" field type the IP address or
DNS domain name of the directory server. For this example we'll 
use "mail.acme.com". Do not check the "My LDAP server requires me to log on"
checkbox. Press the Next button.

6. The next wizard screen will be titled "Check E-mail Addresses". Answer 
"No" to the question "Do you want to check email addresses using this 
directory service?". Press the Next button.

7. The final wizard screen titled "Congratulations" will be displayed. Press
the Finish button.

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

280

281

282

283

284

285

286

287

288

289

290

291

292

293

294

295

296

297

298

299

300

301

302

303

304

305

306

307

308

309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325

326

327

328

329

330

331

332

333

334

335

336

337

338

339

340

341

342

343

344

345

346

347

348

349

350

351

352

353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

368

369

370

371

372

373

374

375

376

377

378

379

380

381

382

383

384

385

386

387

388

389

390

391

392

393

394

395

396

397

398

399

400

401

402

403

404

405

406

407

408

409

410

411

412

413

414

415

416

417

418

419

420

421

422

423

424

425

426

427

428

429

430

431

432

433

434

435

436

437

438

439

440

441

442

443

444

445

446

447

448

449

450

451

452

453

454

455

456

457

458

459

460

461

462

463

464

465

466

467

468

469

470

471

472

473

474

475

476

477

478

479

480

481

482

483

484

485

486

487

488

GOAL: Setup OpenLDAP for use as a Global Address Book by Microsoft

Outlook and SquirrelMail webmail clients.

ENVIRONMENT:

Red Hat Linux Advanced Server release 2.1AS (Pensacola)

INSTRUCTIONS:

1. Install Berkeley DB software.

> cd /usr/local/archive

> wget http://www.sleepycat.com/update/snapshot/db-4.2.52.tar.gz

> tar -xvzf db-4.2.52.tar.gz

> cd db-4.2.52

> cd build_unix/

> ../dist/configure

> make

> make install

2. Install OpenLDAP software.

> cd /usr/local/archive

> wget ftp://ftp.openldap.org/pub/OpenLDAP/openldap-release/openldap-2.2.4.tgz

> tar -xvzf openldap-2.2.4.tgz

Next create a build.sh script with the following:

#!/bin/bash

env CPPFLAGS="-I/usr/local/BerkeleyDB.4.2/include" \

LDFLAGS="-L/usr/local/BerkeleyDB.4.2/lib" ./configure \

--prefix /usr/local/openldap-2.2.4

Make the script executable and run it:

> chmod 755 build.sh

> ./build.sh

Now finish the build:

> make depend

> make

> make install

3. Install Webmin.

See webmin.txt

4. Install perl modules.

> wget http://theoryx5.uwinnipeg.ca/cpan/authors/id/P/PE/PETDANCE/Test-Harness-2.40.tar.gz

> tar -xvzf Test-Harness-2.40.tar.gz

> cd Test-Harness-2.40

> perl Makefile.PL

> make

> make test

> make install

> wget http://theoryx5.uwinnipeg.ca/cpan/authors/id/M/MS/MSCHWERN/Test-Simple-0.47.tar.gz

> tar -xvzf Test-Simple-0.47.tar.gz

> cd Test-Simple-0.47

> perl Makefile.PL

> make

> make test

> make install

> wget http://theoryx5.uwinnipeg.ca/cpan/authors/id/G/GB/GBARR/Convert-ASN1-0.18.tar.gz

> tar -xvzf Convert-ASN1-0.18.tar.gz

> cd Convert-ASN1-0.18

> perl Makefile.PL

> make

> make test

> make install

5. Install OpenLdap2 module for Webmin:

a. Download the module:

> cd /usr/local/archive

> wget http://gaia.anet.fr/webmin/openldap/releases/openldap2-0_1.wbm

b. Login to Webmin.

c. Select Webmin icon from top menu bar.

d. Select Webmin Configuration icon.

e. Select Webin Modules icon.

f. In the Install Module form select "From local file" and enter the path:

/usr/local/archive/openldap2-0_1.wbm

g. Press the Install Module From File button to install the module.

6. Configure OpenLDAP Webmin module.

a. Login to Webmin.

b. Select the Servers icon from the top menu bar.

c. Select the "OpenLDAP Server 2" icon. The following error message will be

displayed:

"It was not possible to read your configuration file for slapd.

Please check int the module configuration that the path for this file is correct."

d. Select the Module Config tab.

e. Enter the following config options into the form:

Path to slapd.conf file: /usr/local/openldap-2.2.4/etc/openldap/slapd.conf

Command to apply changes: service slapd restart

Command to start slapd: service slapd start

Command to stop slapd: service slapd stop

Port number daemon slapd is listening to: 389

Path to slapd daemon: /usr/local/openldap-2.2.4/libexec/slapd

LDAP Properties for all new users:

objectClass: inetorgperson

objectClass: top

Email domain for mail attribute: acme.com

f. Press the Save button. You will be returned to the main OpenLDAP config screen.

7. Apply BDB support patch to OpenLdap2 Webmin module.

> cd /usr/local/archive

> wget http://www.reliablepenguin.com/projects/ldap/openldap2_webmin_bdb.patch

> cd /usr/libexec/webmin/openldap2

> patch -Np5 < /usr/local/archive/openldap2_webmin_bdb.patch

8. Setup slapd service:

> cd /usr/local/archive

> wget http://www.reliablepenguin.com/clients/misc/slapd.service

> cp slapd.service /etc/init.d/slapd

> chkconfig --add slapd

> chkconfig --level 35 slapd on

9. Generate directory administrator's password:

> /usr/local/openldap-2.2.4/sbin/slappasswd -h {MD5}

You will be prompted to enter a password and then the crypted version

of the password will be displayed:

New password:

Re-enter new password:

{MD5}risfylFZSeXVT7IrjtlVdQ==

The crypted password is "{MD5}risfylFZSeXVT7IrjtlVdQ==". Save this string

for use in the next step.

10. Configure OpenLDAP via Webmin.

a. Login to Webmin.

b. Select the Servers icon from top menu bar.

c. Select the "OpenLdap Server 2" icon.

d. Delete the default backend definition by selecting the

predefined backend named "dc=my-domain,dc=com". Press the delete

button at the bottom of the screen and when prompted confirm the deletion.

e. Define a new backend by selecting the "Add backend" link. The "Add Backend"

form will be displayed. Enter the suffix:

c=US

Set the backend type to "bdb".

Press the "Create backend" button at the bottom of the form.

Next a form for setting backend options will be displayed. Set the following

fields under "General Backend Options" :

Directory : /usr/local/openldap-2.2.4/var/openldap-us-data

Press the "Save" button at the bottom of the form to save changes and return

to the "Global Options" screen.

f. Define a new backend by selecting the "Add backend" link. The "Add Backend"

form will be displayed. Enter a suffix like:

dc=my-domain,dc=com

Each component of your domain should be repesented by a domain component (dc)

element. For example if your domain is "acme.com" then use:

dc=acme,dc=com

Or if your domain is "accounting.acme.com" then use:

dc=accounting,dc=acme,dc=com

Set the backend type to "bdb".

Press the "Create backend" button at the bottom of the form.

Next a form for setting backend options will be displayed. Set the following

fields under "General Backend Options" :

Administrator DN : cn=Administrator,dc=acme,dc=com

Administrator Password : {paste in crypted password from previous step}

Read Only : No

Schema Check : Yes

Default Access : None

Last Modifiers : Yes

Size Limit : 500

Time Limit : 120

Set the following fields under "BDB backend specific options" :

Directory : /usr/local/openldap-2.2.4/var/openldap-data

Cache Size : 1000

Max Search Stack Depth : 16

Files Protection Mode : 0600

Checkpoint Every : 100 10

DB No Sync : No

Allow Dirty Reads : No

IDL Cache Size : 0

SHM Key : leave blank

Session Log Store : leave blank

Deadlock Handling : Default

Press the "Save" button at the bottom of the form to save changes and return

to the "Global Options" screen.

g. Select the "Include Files" icon at the bottom of the screen.

Enter:

/usr/local/openldap-2.2.4/etc/openldap/schema/cosine.schema

into the "Create a new include file" field and press the "Create" button.

Repeat this process to create include files for:

/usr/local/openldap-2.2.4/etc/openldap/schema/nis.schema

/usr/local/openldap-2.2.4/etc/openldap/schema/inetorgperson.schema

h. Now start the slapd server:

> service slapd start

and run the following test query:

> ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts

You should get results similar to:

version: 2

# filter: (objectclass=*)

# requesting: namingContexts

dn:

namingContexts: dc=acme,dc=com

# search result

search: 2

result: 0 Success

# numResponses: 2

# numEntries: 1

Now test the c=US referral is working:

> ldapsearch -x -b "c=US"

You should see results similar to:

version: 2

# filter: (objectclass=*)

# requesting: ALL

# search result

search: 2

result: 10 Referral

matchedDN: c=US

ref: ldap://mail.acme.com/dc=acme,dc=com??sub

# numResponses: 1

11. Initialize the LDAP database.

a. Create a file in /usr/local/openldap-2.2.4/etc/openldap named top.ldif with

the following contents:

dn: dc=acme,dc=com

objectClass: top

objectClass: dcObject

objectClass: organization

dc: acme

o: Acme, Inc.

description: Acme, Inc.

dn: cn=Administrator,dc=acme,dc=com

objectClass: organizationalRole

cn: Administrator

description: Directory Manager

dn: ou=People,dc=acme,dc=com

objectClass: top

objectClass: organizationalUnit

ou: People

description: Container for people objects.

dn: ou=Groups,dc=acme,dc=com

objectClass: top

objectClass: organizationalUnit

ou: Groups

description: Container for group objects.

b. Import top.ldif into OpenLDAP using the slapadd command:

> /usr/local/openldap-2.2.4/sbin/slapadd -v \

-f /usr/local/openldap-2.2.4/etc/openldap/slapd.conf \

-l /usr/local/openldap-2.2.4/etc/openldap/top.ldif

c. Create directory for c=US database:

> mkdir /usr/local/openldap-2.2.4/var/openldap-us-data

c. Create a file in /usr/local/openldap-2.2.4/etc/openldap named top2.ldif with

the following contents:

dn: c=US

objectClass: top

objectClass: referral

objectClass: extensibleObject

c: US

description: placeholder

ref: ldap://mail.acme.com/dc=acme,dc=com

b. Import top2.ldif into OpenLDAP using the slapadd command:

> /usr/local/openldap-2.2.4/sbin/slapadd -v \

-f /usr/local/openldap-2.2.4/etc/openldap/slapd.conf \

-l /usr/local/openldap-2.2.4/etc/openldap/top2.ldif

12. Verify that required rpm packages are installed:

> rpm -q openldap

openldap-2.0.21-1

> rpm -q openldap-clients

openldap-clients-2.0.21-1

> rpm -q auth_ldap

auth_ldap-1.4.8-3

> rpm -q nss_ldap.

nss_ldap-172-3

13. Configure nss_ldap and pam_ldap module.

Edit /etc/ldap.conf

a. Set host to the local machine.

host 127.0.0.1

b. Set base to the same as used in the openldap config.

base dc=acme,dc=com

c. Set port to 389.

port 389

d. Set the bind DN for root:

rootbinddn cn=Administrator,dc=acme,dc=com

e. Set scope to one level:

scope one

f. Set pam_filter:

pam_filter objectclass=posixaccount

g. Set pam_login_attribute:

pam_login_attribute uid

h. Set pam_member_attribute:

pam_member_attribute uid

i. Set pam_password:

pam_password md5

j. Set object bases:

nss_base_passwd ou=People,dc=acme,dc=com?one

nss_base_shadow ou=People,dc=acme,dc=com?one

nss_base_group ou=Groups,dc=acme,dc=com?one

14. Create a file at /etc named ldap.secret.

Place in this file on a single line the password for the Administrator.

Set the permissions on this file:

> chmod 600 /etc/ldap.secret

15. Modify NSS config file.

Change the passwd, shadow and group lines to read as follows:

passwd: files ldap

shadow: files ldap

group: files ldap

16. Setup access controls.

a. Login to Webmin.

b. Select the Servers icon from the top menu bar.

c. Select the "OpenLDAP 2 Server" icon.

defaultaccess none

access to dn.subtree="dc=acme,dc=com" attr=userPassword

by dn="cn=root,dc=acme,dc=com" write

by self write

by * auth

access to dn.subtree="ou=People,dc=acme,dc=com"

by * read

access to dn.subtree="dc=acme,dc=com"

by * read

access to dn.subtree="c=US"

by * read

16. Login to webmin. Select System icon. Select LDAP Users and Groups.

A message saying that Perl-LDAP is not installed will be displayed. Select

the link to install this module.

Import Users

============

cat import.ldif | ldapadd -h localhost \

-w adminpass -D "cn=Administrator,dc=acme,dc=net" -x

CLIENT CONFIGURATION

====================

Outlook Express 6

1. Start Microsoft Outlook.

2. From the menu bar select Tools and then select Address Book. The Address

Book window will be displayed.

3. Select Tools from the menu bar and then select Accounts. The Internet

Accounts dialog will be displayed.

4. Press the Add button to create a new directory service definition. The

"Internet Connection Wizard" will be displayed. The first screen of the

wizard is titled "Internet Directory Serer Name".

5. In the "Internet directory (LDAP) server" field type the IP address or

DNS domain name of the directory server. For this example we'll

use "mail.acme.com". Do not check the "My LDAP server requires me to log on"

checkbox. Press the Next button.

6. The next wizard screen will be titled "Check E-mail Addresses". Answer

"No" to the question "Do you want to check email addresses using this

directory service?". Press the Next button.

7. The final wizard screen titled "Congratulations" will be displayed. Press

the Finish button.

FreeSwan Advanced Configs

July 30, 2004

http://www.freeswan.org/freeswan_trees/freeswan-2.06/doc/adv_config.html#adv_config

OpenSSH on Debian 3.0

July 28, 2004


> cd /root
> wget http://www.openssl.org/source/openssl-0.9.7b.tar.gz
> tar -xvzf openssl-0.9.7b.tar.gz
> cd openssl-0.9.7b
> ./config
> make
> make test
> make install
> cd ..
> mv openssl-0.9.7b.tar.gz archive/
> rm -rf openssl-0.9.7b

> cd /root
> wget http://www.gzip.org/zlib/zlib-1.1.4.tar.gz
> tar -xvzf zlib-1.1.4.tar.gz
> cd zlib-1.1.4
> ./configure
> make
> make install
> cd ..
> mv zlib-1.1.4.tar.gz archive/
> rm -rf zlib-1.1.4

> cd /root
> wget ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-3.6.1p2.tar.gz
> tar -xvzf openssh-3.6.1p2.tar.gz
> cd openssh-3.6.1p2
> ./configure --prefix=/usr --sysconfdir=/etc/ssh
> make
> make install
> /etc/init.d/ssh restart
> cd ..
> mv openssh-3.6.1p2.tar.gz archive/
> rm -rf openssh-3.6.1p2/

> cd /root

> wget http://www.openssl.org/source/openssl-0.9.7b.tar.gz

> tar -xvzf openssl-0.9.7b.tar.gz

> cd openssl-0.9.7b

> ./config

> make

> make test

> make install

> cd ..

> mv openssl-0.9.7b.tar.gz archive/

> rm -rf openssl-0.9.7b

> cd /root

> wget http://www.gzip.org/zlib/zlib-1.1.4.tar.gz

> tar -xvzf zlib-1.1.4.tar.gz

> cd zlib-1.1.4

> ./configure

> make

> make install

> cd ..

> mv zlib-1.1.4.tar.gz archive/

> rm -rf zlib-1.1.4

> cd /root

> wget ftp://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-3.6.1p2.tar.gz

> tar -xvzf openssh-3.6.1p2.tar.gz

> cd openssh-3.6.1p2

> ./configure --prefix=/usr --sysconfdir=/etc/ssh

> make

> make install

> /etc/init.d/ssh restart

> cd ..

> mv openssh-3.6.1p2.tar.gz archive/

> rm -rf openssh-3.6.1p2/

Reliable Penguin provides managed web hosting, systems administration, website and server migrations, and expert consulting.

Recent Updates

Fixing WP‑CLI “eval()’d code” Parse Errors on PHP 8.4 During “wp db import”

Force a 404 With a CloudFront Function (Always)

HTTP Basic Auth Is Dead

WordPress 6.8 Speculative Loading Can Break HTTP Basic Auth

Zero‑Trust for WordPress Admin with Cloudflare Access (Email One‑Time Codes)

Category: Reliable Penguin

Nagios Install

NCFTP Client

OpenLDAP as Global Addres Book

FreeSwan Advanced Configs

OpenSSH on Debian 3.0

Recent Updates

Categories

Get a free consultation from Reliable Penguin